610 × 610 or 592 × 592? Nominal vs Actual Filter Sizes and the 292 mm Depth
Understand where common 610, 592 and 292 mm dimensions apply, and measure the filter interface before assuming two sizes are interchangeable.
Read the articleULPATEK · KNOWLEDGE & GUIDANCE
Clear answers to the questions behind a good filter choice. Selection, standards, energy and the details that matter in use.
Learn why an acceptable overall efficiency cannot cancel a failed local result, and how a leak scan differs from both measurements.
Read the article47 articles
Understand where common 610, 592 and 292 mm dimensions apply, and measure the filter interface before assuming two sizes are interchangeable.
Read the articleWhat a revised standard means for filter orders, existing reports and supplier documents, with a clear distinction between draft and published requirements.
Read the articleFollow the evidence from factory release to installation to investigate a failed site test without losing the original failure record.
Read the articleUse the site's dust, temperature, moisture and loading profile to select filters and plan maintenance around periods of heavy exposure.
Read the articleCompare energy letters within the correct efficiency band, then read the rated kWh and cost assumptions behind the label.
Read the articleReplace a vague food-grade certificate request with clear information about the application, product exposure, filter construction and evidence needed.
Read the articleUnderstand why E10–E12 classification does not carry the HEPA local scan requirement, and request the performance evidence appropriate to the filter.
Read the articleCompare fan filter units and terminal boxes at the same duty, including pressure budgets, controls, maintenance access and system energy.
Read the articleStart with the supplied product and its intended use to separate filtration evidence from the conformity requirements for powered equipment.
Read the articleWork through filter energy, purchase and maintenance costs with every assumption stated, then see where the more expensive filter breaks even.
Read the articleCheck the complete filter's continuous and peak temperature limits, including seals, separators and the airflow basis used for the hot process.
Read the articleRead serial numbers, airflow, MPPS and local results in the right order, with an illustrative H14 report to explain common mistakes.
Read the articleBesides necessary cookies, we use Google Analytics and Google Ads cookies for visit statistics and ad measurement if you consent. Privacy Policy