Applications

  • Capturing fine particles
  • Second or final stage filter in HVAC
  • Pre-filter for HEPA filters

Highlights

  • Large filtration area
  • Simple and light weight
  • High dust holding capacity
  • Low initial pressure drop

Technical Specifications

Filter Standard:ISO 16890Max. Operating Tempature:80˚C
Filter Class:ISO ePM1 - ISO ePM2,5 - ISO ePM10Sealing Compound:Two component polyurethane
Media:Glass FibreSeperators: Hotmelt
Frame:Anodized extruded aluminium, MDFFaceguard: Aluminium sheet (powder coated)
Rec. Final Pressure Drop EN13053:Initial ΔP +100 Pa or initial ΔP x3
whichever is lower
Gasket: EPDM flat, EPDM flat continous
and PU foam

Order Code

Filter TypeFilter
Class
FramePleat HeightDimensions
(mm)
FaceguardGasket
FC : Ceiling Type
Filter
M6
F7
F8
F9
A: Aluminium
M: MDF
1: 50 mm
2: 65 mm
3: 75 mm
4: 85 mm
5: 90 mm
6: 100 mm
7: 125 mm
610x610x78FW: Without
FC: On Clean Side
FD: On Dirty Side
FB: On Both Sides
W: Without
P: Continuous Pu Foam
PP: Pu Foam on Both Sides
E: EPDM
EE: EPDM Flat On Both Sides
C: Continuous Grey EPDM
CC: Grey EPDM on Both Sides

CEILING TYPE FILTER FC 78

Filter ModelEN 779
(cancelled)
ISO 16890Dimensions
WxHxD
(mm)
Filtration
Area
(m²)
Pleat
Height
(mm)
Nominal
Airflow
(m³/h)
Initial
Pressure Drop
(Pa)
FC-M6-A-1-305-305-78-FC-PM6ePM10 70%305x305x782.35075080
FC-M6-A-1-305-610-78-FC-PM6ePM10 70%305x610x784.550150080
FC-M6-A-1-610-610-78-FC-PM6ePM10 70%610x610x78950300080
FC-F7-A-1-305-305-78-FC-PF7ePM1 55%305x305x782.350750115
FC-F7-A-1-305-610-78-FC-PF7ePM1 55%305x610x784.5501500115
FC-F7-A-1-610-610-78-FC-PF7ePM1 55%610x610x789503000115
FC-F8-A-1-305-305-78-FC-PF8ePM1 70%305x305x782.350750120
FC-F8-A-1-305-610-78-FC-PF8ePM1 70%305x610x784.5501500120
FC-F8-A-1-610-610-78-FC-PF8ePM1 70%610x610x789503000120
FC-F9-A-1-305-305-78-FC-PF9ePM1 80%305x305x782.350750145
FC-F9-A-1-305-610-78-FC-PF9ePM1 80%305x610x784.5501500145
FC-F9-A-1-610-610-78-FC-PF9ePM1 80%610x610x789503000145

“Other dimensions are available on request.”
“Differential Pressure Tolerance ( ±10% + 5 Pa ) or ( 10 Pa + 5 Pa ) whichever is greater”

CEILING TYPE FILTER FC 150

Filter ModelEN 779
(cancelled)
ISO 16890Dimensions
WxHxD
(mm)
Filtration
Area
(m²)
Pleat
Height
(mm)
Nominal
Airflow
(m³/h)
Initial
Pressure Drop
(Pa)
FC-M6-A-7-305-305-150-FC-PM6ePM10 70%305x305x1504.512575060
FC-M6-A-7-305-610-150-FC-PM6ePM10 70%305x610x1509125150060
FC-M6-A-7-610-610-150-FC-PM6ePM10 70%610x610x15018125300060
FC-F7-A-7-305-305-150-FC-PF7ePM1 55%305x305x1504.512575080
FC-F7-A-7-305-610-150-FC-PF7ePM1 55%305x610x1509125150080
FC-F7-A-7-610-610-150-FC-PF7ePM1 55%610x610x15018125300080
FC-F8-A-7-305-305-150-FC-PF8ePM1 70%305x305x1504.5125750100
FC-F8-A-7-305-610-150-FC-PF8ePM1 70%305x610x15091251500100
FC-F8-A-7-610-610-150-FC-PF8ePM1 70%610x610x150181253000100
FC-F9-A-7-305-305-150-FC-PF9ePM1 80%305x305x1504.5125750130
FC-F9-A-7-305-610-150-FC-PF9ePM1 80%305x610x15091251500130
FC-F9-A-7-610-610-150-FC-PF9ePM1 80%610x610x150181253000130

“Other dimensions are available on request.”
“Differential Pressure Tolerance ( ±10% + 5 Pa ) or ( 10 Pa + 5 Pa ) whichever is greater”